For Sale: This set has been carefully checked and is complete except for the micro SD to USB adapter. It's a common adapter but don't have any extras so instead am including a free PNY micro SD to SD memory card adapter.
The internal smaller box with the Touch Board has a factory seal on it- never been opened. Box states that the micro SD card is also inside. Mint condition manual. The 50ml container of "Electric Paint" is factory sealed as is the 10ml tube of electric paint .The jumper cables with alligator clips and the white and the black USB cables look unused and mint. The brush and the three template sheets of blue, light blue, and yellow rolls appear unused- the blue sheet has a TINY tear on the edge, see last photo for details.
Not shown in the listing photos but included are a PNY micro SD to SD adapter, the 3 "velcro tabs", and the 12 "sticky pads" mentioned on the box.
The outer box is in very poor condition and has tape and writing on it, see photos.
NOTE: The mini VEHO360 speaker is untested, has probably never been used but the rubberized coating has become a little sticky to the touch as sometimes happens with devices using this kind to the rubber covering when they are stored for a while- you should be able to clean it all off with isopropyl alcohol if you want. Also it appears as you supposed to be able to "twist and lock" it into a slightly more compact configuration but it doesn't lock into place.
Go to bareconductive.com for full specs, downloads, libraries, scripts, software, YouTube videos, tutorials, details, etc.
----------------------------------------------------------------------------------
Turn touch into sound, light, or data
Create smart surfaces by connecting pads of Electric Paint or other conductive materials to your Touch Board. Use the Touch Board to bring your ideas to life. Create interactive murals, sophisticated prototypes or playful projects.
12 CAPACITIVE ELECTRODES
The Touch Board has 12 capacitive electrodes that respond to a touch. These electrodes can be extended with conductive materials, like Electric Paint,
MP3 PLAYER AND MIDI SYNTHESIZER
The Touch Board has on-board MP3 playback and a MIDI synthesizer. This means you can either play MP3 files or simulate a MIDI instrument by touching the electrodes.
3.5MM AUDIO SOCKET
In order to hear the sounds coming from the Touch Board simply connect either headphones or speakers to the 3.5mm audio socket.
MICROSD CARD READER
Upload MP3 files onto the supplied microSD card and change it without having to reprogram the Touch Board.
USB SERIAL, MIDI INTERFACE AND MOUSE AND KEYBOARD
When plugged into a computer, the Touch Board can act as a USB serial device, USB MIDI interface or as a USB mouse or keyboard. Use the data from the electrodes as an input for software that utilises either serial, MIDI or keyboard strokes.
Additional and/or higher resolution photos are available by request.
Email for a shipping cost quote - should be between $XX.99 and $XX.99 if you in the continental United States. (Dec. 2024).
