For Sale: Made in Japan late 1970's. The motor is working well and AFAIK it does not need any repair. You will need the following parts or substitutes:
- counterweight
- headshell (uses standard type)
- phono cartridge
- platter mat (rubber or felt or ???)
- tonearm holder clip (optional)
- dust cover and hinges (optional)
Tested this using some taped on batteries as a substitute counterweight and a Stanton headshell and cartridge (not included). The strobe and pitch control are working correctly. Speed looks and sounds dead on correct both on 33 and 45 RPM. Both left and right channels sounded clear with no static, hum, or distortion. This is a direct drive semi auto turntable and auto return and shutoff worked well during testing. The cuing lever and action seem to be working correctly. Platter is original and in good shape. The four shock absorbing rubber feet on bottom are in good condition.
Cosmetically just a little minor surface wear. It's pretty clean but probably can use some detailing. Besides the tonearm holder clip don't see any damage.
Specs:
--------------------------------------
Drive system: direct drive
Motor: DC servo controlled (brushless and slotless)
Platter: 313mm aluminium alloy
Speeds: 33 and 45rpm
Wow and flutter: 0.04% wrms
Signal to noise ratio: 68dB
Automatic system: arm return, reject
Tonearm: statically balance universal type
Pivot to stylus length: 216.5mm
Overhang: 16.5mm
Headshell weight: 7.5g
Cartridge weight range: 4 to 10g
Dimensions: 445 x 140 x 375mm
Listed on edsgoodstuff webstore
Email me for higher resolution and/or additional photos.
Contact for shipping quote - should be around $11.99 to $19.99 if you are in the USA. (June 2026).
