Realistic STA-2200 - STEREO RECEIVER - made in Japan 1980, 60w

(image for) Call for Price

For Sale: Classic Japanese made MOSFET powered stereo receiver.

Working 100% with excellent sound quality, no distortion or hum. Very good reception on both AM and FM stereo. All features including digital clock, station memory (uses 9 volt battery for power loss protection), flourescent display, tuning indicator LEDs, power level LEDs, all controls, etc. working correctly. Includes FM wire antenna. Veneer shows a little wear, one ding on corner, not bad.

Features preamplifier output/main input, Dolby FM, dimmer, phono (turntable) inputs, dual speaker terminal/RCA speaker jacks, DIN tape deck jacks.

Owner's Manual, Service Manual, reviews etc. here:

From the web:

Power output: 60 watts per channel into 8Ω (stereo)

Frequency response: 15Hz to 25kHz

Total harmonic distortion: 0.02%

Input sensitivity: 2.2mV (MM), 160mV (DIN), 160mV (line)

Signal to noise ratio: 65dB (MM), 75dB (line)

Output: 140mV (line), 3.3mV (DIN)

The Realistic STA-2200 is a high-powered AM/FM Stereo Receiver utilizing the latest in digital computer technology for a product unmatched in quality, versatility and reliability.

The built-in microprocessor-controlled CMOS LSI Frequency Synthesizer eliminates the dial scale and replaces it with an ultra-accurate digital readout.

The STA-2200 tunes up or down the dial automatically, stopping at each station that's on the air in your area.

In addition, the receiver features:

  • FM front-end uses a dual-gate MOS FET for immunity from problems caused by overloading (local strong signals) and other spurious-response effects. Tuning is with Varicap Diodes, controlled by the Microprocessor (no mechanical tuning problems).
  • FM IF section incorporates 3 ICs resulting in very high gain and outstanding limiting characteristics (ultra-low-noise FM reception). Three linear-phase ceramic filters assure superb selectivity with lowest distortion. Quadrature detector and PLL stereo detector gives you the best possible FM and FM Stereo Signal with state-of-the-art separation.
  • PLL Frequency-Synthesizing CMOS IC provides no drift, digital tuning.
  • 12 Memory Locations store your favourite stations for easy one-button access (six for AM, six for FM).
  • Real-time clock.
  • MOS-FETs in the power amplifier for high-power with ultra-low distortion even at high frequencies.
  • Automatic Protection Circuitry to protect against voltage surges, overloads, shorts and overheating.
  • Switchable DOLBY FM processor to let you enjoy the low-noise and increased dynamic range of stations broadcasting Dolby encoded music.

The pre-amplifier section allows you to tailor the sound to your preference with selectable turnover on the Tone controls and a wide range of inputs.

The Power Amplifier delivers a solid 60 watts RMS per channel. Enough to drive two pairs of even the most inefficient speaker systems.



Email for additional and/or higher resolution photos.

Send your zip code for a ship quote- should be between $15.99 and $38.99 if you are in U.S.A. (June 2018).


Copyright © 2024 EdsGoodStuff. Powered by Magic Numbers LOA