Stereo Tube Amplifier - 16 watts per channel w/tube phono preamp

$225.00
(image for) Call for Price

For Sale: Good quality TubeDepot kit built Model 16LS Stereo Integrated Tube amplifier with optional "Stereo Phono Preamp Tube Kit for L Series amplifiers".

Super clean, working perfectly. You can leave this as an open air amp or you can build a custom case for it. I did not build this but the person I got it from did a professional job. It's working 100% and has been fully tested with both line inputs and a turntable with a standard magnetic phono cartridge. It sounds excellent, no distortion, no static, no issues. The tubes appear to all be matched new/old stock GE made in the USA tubes originally provided with the kit. Previous owner says he used it for about 30 hours or so total so it's practically new. If requested will included free RCA cables and/or a 3.5mm to RCA stereo cable that you can use to plug in any MP3 player, CD player, or phone with a standard headphone jack. I tested this right after testing the turntable with a standard solid state amp and the same speakers - the sound from this tube amp was noticeably better to me, am usually skeptical but there was a definite difference in quality.

YouTube videos taken with both line input (CD player) and turntable hooked up:

https://www.youtube.com/watch?v=q5hTXpQtknQ

https://www.youtube.com/watch?v=waqN_yA4uzY

Tube Depot current prices for these are $350 for the unbuilt amp kit and $120 for the preamp kit.

---------------------------
The Stereo Integrated Tube Amplifier utilizes 5670 triode and 6005 pentode tubes. The amplifier has built in volume control so that it can be driven directly from a CD player, tuner, etc. The amplifier can operate on 120 or 240 Volts and 50 or 60 Hertz and may be plugged into a convenient outlet.

  • Input Impedance = 100k ohms
  • Input connector = RCA jacks
  • Output Impedance = 4 and 8 ohms each channel
  • Output Power = Push Pull 16 Watts per channel
  • Speaker Impedance = 4 or 8 ohms each channel
  • The circuit is a Class A amplifier
  • Minimum Input for full output = .5 V
  • Frequency Response = 20 to 20,000 Hz
  • Total Harmonic Distortion at 1 Watt <1%

------------------------------------------
Phono preamp: The Tube Preamplifier utilizes a 5670 triode. The Preamplifier is compatible with all "L" Series Amplifiers, it gets its B+ and filament voltage from the Amplifier board and can provide 10 to 30 db of gain.

Additional high resolution photos available on request. 

Send your zip code and city for a shipping quote - should be between $12.99 and $26.99 if you are located in United States of America. (May 2023). 

Customers who bought this product also purchased...

Copyright © 2024 EdsGoodStuff. Powered by Magic Numbers LOA