For Sale: High quality amplifier in mint or near mint shape. Includes original manual. Made in the USA.
Amp works 100%. Excellent sound quality and effects, all controls working correctly, real spring reverb is good, good power light, nice and clean.
Single channel, 1x8, 10 watts.
We call this our Direct Recording Combo Amp. We should have called it Yoda, because there isn’t much this diminutive wizard can’t handle. The heart of the crafty Trademark 10 is a modified version of the super flexible SansAmp GT2 pedal design. Construct your tone by selecting amp character, gain structure and speaker type, and then use the drive controls and active three-band EQ to nail your sound. The 10-watt output is plenty loud for practice and monitoring but the balanced XLR and 1/4” outputs bring the big tones of this little combo to the studio mixer or PA system. Bedroom, rehearsal, studio or club, the Trademark 10 will prove it’s a giant amongst compact combos.
More info from the manufacturer: http://www.tech21nyc.com/archive/trademark10.html
From the webernet:
|
Model Number
|
TM10 |
|
Input Impedance
|
1MOhm |
|
Nominal Input Level*
|
-10dBu |
|
Optimum Output Load
|
8 Ohms |
|
Power Output
|
10W |
|
Effect Loop Input Impedance
|
1MOhm |
|
Maximum Effect Loop Input*
|
approx. -6dBu |
|
Effect Loop Output Impedance
|
1KOhm |
|
Nominal Effect Loop Output*
|
approx. -20dBu |
|
Nominal XLR Output*
|
approx. -20dBu |
|
Maximum Power Consumption
|
30W |
|
AC Input Power (Factory Set)
|
110V, 117V, 230V, 240V |
|
Cycles
|
50/60Hz |
| Speaker |
Special Design Model #C2108-A 8", 15W, 8 Ohms |
|
Cabinet Dimensions
|
14.5"l x 8"w x 13.25"h |
|
Weight
|
12lbs |
Email for additional and/or higher resolution photos.
Send your zip code for a ship quote- should be between $13.99 and $29.99 if you are in U.S.A. (June 2018).
